Energy Manager

Commercial Electrical Industrial Institutional Residential
Energy efficient T8 lighting tubes from LEDtronics

Energy-efficient T8/bi-pin LED lighting tubes are the latest fluorescent-replacement LED lighting products LEDtronics announces in its green-technology lineup. The series LED48T8-288-001W bi-pin LED fits into standard G13 bases and is designed to directly replace conventional T8 fluorescent tubes that provide general lighting for commercial, residential and architectural lighting applications. The 48" long white tubes provide the equivalent light output of 24 to 32-watt fluorescent lamps while consuming less than a maximum of 19 watts. In addition, the LED48T8 tubes run on a wide voltage range of 100 to 290 volts AC.

July 8, 2009  By Energy Management

While conventional fluorescent lamps typically have a rated life in the range 8,000 to 24,000 hours, the LED48T8 lamps boast an operating life of 50,000 hours and more — 5.7 years of continuous light. Furthermore, since the LED lights produce so little wasted heat, the temperature inside the fixture does not build up as it does with conventional fluorescent tubes. The sturdy construction of a UV-resistant polycarbonate housing over the LED tube provides increased protection (no glass to break) and shielding against many environmental effects, allowing them to be placed in locations where typical lights would be more vulnerable to the elements. In addition, LEDs perform well in temperatures from -35C° to +45C°, making them ideal for applications subject to frequent on-off cycling, such as garages and basements, while the aluminum back cover helps with better heat dissipation and a longer lifetime for the LEDs.

The LEDtronics LED48T8 lights deliver up to 1,342 lumens at a color temperature of 5000K (pure daylight white) and 1,072 lumens at a color temperature of 3000K (warm white), compared to the average 810 lumens for equivalent conventional fluorescent tubes. They provide a brightness of up to 429 maximum foot candela across a 114-degree beam pattern, with an impressive CRI of 80.

Other benefits of LEDs over fluorescents include: Quick and easy installation to minimize retrofit costs; no ballast and starter needed, thus no radio frequency to interfere with radio and television signals; instant, full-strength lightup; no buzzing or flickering; and directional distribution of light—good for interior task lighting.

Solid-state design renders LEDs impervious to shock, vibration, frequent switching and environmental extremes. Savings from reduced maintenance costs and downtime quickly return the capital investment expenditure, making them as friendly to the environment as they are to the operating budget. The positive environmental impacts of LED lights additionally come from the consistent, reduced power consumption, long service life, high-quality light, and cold temperature operation, with the corresponding reduction in greenhouse gases and the reduced waste from fewer replacements. Unlike conventional fluorescent bulbs, LED lights are not disposed of as hazardous waste at end of life.


The LEDtronics LED48T8 tubes comply with RoHS—the lead-free and mercury-free directive, as well as the CE safety assurance. They emit no infrared or ultraviolet radiation, and effectively reduce light pollution, being compatible with the international “dark skies” initiative.

The LED48T8-288-001W Premium 4-ft (1200mm) Tube Lights come in two colors: Warm White (SIW) and Pure Daylight White (TPW). Other viewing angles, tube lengths and a variety of LED colors are available for OEM customers. Large-quantity discounts are available for qualified distributors.

Print this page


Stories continue below